Now we have the Apache configuration pointing to a Sites folder in our home directory. One problem still exists, however. By default, apache runs as the user _www and group _www. This will cause permission problems when trying to access files in our home directory. About a third of the way down the httpd.conf file there are two settings to set the User and Group Apache will run under. Change these to match your user account (replace your_user with your real username), with a group of staff:
I've switched from using sudo to launch httpd with root (even though it ran as the user/group defined in httpd.conf), and for people who have upgraded from that version to this, there have been problems.
Download And Run Httpd Mac
I ran into some problems myself but was able to get it working pretty easily, but others have reported more wide-spread problems. Please try these steps if your Apache is not starting when you use brew services start httpd.
You have successfully installed your PHP versions, but we need to tell Apache to use them. You will again need to edit the /opt/homebrew/etc/httpd/httpd.conf file scroll to the bottom of the LoadModule entries.
Another Google search took me to A click on the Downloads link and I was downloading a Mac OS disk image from which I did the usual drag and drop routine into the Applications folder. Then running the installed AMPPS application gave me this:
Java is installed by default on every MacOS X installation. MacOS X 10.2 (Jaguar) comes with Java 1.3; MacOS X 10.3 (Panther) comes with Java 1.4. MacOS X 10.4 (Tiger) comes with Java 1.4.2 installed, but Java 1.5 can be downloaded. MacOS X 10.5 (Leopard) comes with Java 1.5. MacOS X 10.5 (Snow Leopard) comes with Java 1.6. It is possible to run Java 1.4 on MacOS X Jaguar but it may interfere with operation of the standard environment.
Since I had already installed and played with a separate install of Tomcat (the version installed by Apple's XCode was out of date, as was the version I downloaded from another site), I was ready to give up!
Applications that run on Tomcat 9 and earlier will not run on Tomcat 10without changes. Java EE based applications designed for Tomcat 9 and earliermay be placed in the $CATALINA_BASE/webapps-javaee directory andTomcat will automatically convert them to Jakarta EE and copy them to thewebapps directory. This conversion is performed using theApache Tomcatmigration tool for Jakarta EE tool which is also available as a separatedownload for off-line use.
If you prefer the leading-edge code, you can access the code as it is being developed via Git. The Ant website hasdetails on accessing Git. All bug fixes will go in againstthe HEAD of the source tree, and the first response to many bug reports will be "have you tried the latestversion". Don't be afraid to download and build a prerelease distribution, as everything other than new features areusually stable.
Where possible, this option is generally to be preferred, as the Ant script itself can determine the best path to loadthe library from: via relative path from the basedir (if you keep the library under version control with your project),according to Ant properties, environment variables, Ivy downloads, whatever you like.
Make sure you have downloaded any auxiliary JARs required to build tasks you are interested in. These should be added tothe lib/optional directory of the source tree. See Library Dependenciesfor a list of JAR requirements for various features. Note that this will make the auxiliary JAR available for thebuilding of Ant only. For running Ant you will still need to make the JARs available as describedunder Installing Ant.
Since Ant 1.7.0, Ant has a hard dependency on JUnit. The fetch.xml build script will downloadJUnit automatically, but if you don't use this you must install it manually into lib/optional (download itfrom JUnit.org) if you are using a source distribution of Ant.
At the moment, Macbook is removed PHP in macOS Montery. That's mean we can run the application is run LAMP Stack. We need to backup this case. I found a lot case why and how we can change this.To cover this case, I use the httpd package of homebrew. I will show you we can do now.
Open browser and go to address :8080/moodle - moodle is a folder in httpd root directory. You will see the list of files php - tree directory. That's mean you have to success setup httpd in macOS 12. And also we need to setup the php to run php application.
This procedure explains how to download and install the source distribution on a Unix system. This procedure assumes the Unix machine has a browser. Please see the previous #Unix Binary Installation section for details on how to install ActiveMQ without a browser.
For users who are not running macOS or do not have Homebrew installed, after downloading the version of NiFi that youwould like to use, simply extract the archive to the location that you wish to run the application from.
Welcome to Apache OpenOffice Quick-Start Guide for Windows environments. Below you will find step-by-step instructionsto download and install Apache OpenOffice 4.x versions on your system. You may want to print this instruction sheet forreference before beginning to download and install Apache OpenOffice.
If you have Windows XP, you may wish to view aflash presentation overview of thedownload and installation procedure. Note: The presentation does not include checking the integrity of the downloaded fileand returns you to the Apache OpenOffice home page. At the finish of the presentation click the Back button in your browserto return to this page.
If your connection is not very fast (and or you are behind a dial up connection), you might consider a program thatenables you to pause/resume the download. We've listed some populardownload managers here.
Click the "Continue to Download" button to proceed to download Apache OpenOffice to your computer. You will be prompted by a dialog window as to where you want to place the download file on your computer. Note this down, as you will need to find it later to install Apache OpenOffice on your computer.
Finally, start up Apache OpenOffice 4.x.x to insure it's working.
Linux DEB-based Installation One you download the Apache OpenOffice tar.gz package, you should be able to decompress typing. tar Apache-OpenOfficeX.X.X.tar.gz package or using programs such as Ark, or File-Roller.
cd into the DEBS subdirectory of the installation directory. You should see a lot of debs here and one sub-directory called "desktop-integration".
Install this new version by typing sudo dpkg -i *.deb or become root using su command. By default, this will install/update Apache OpenOffice in your /opt directory. Alternatively, you can use a GUI package installer, reference the installation directory, and install all debs at the top level. This may also aid you in determing any dependency problems if they exist.
Install the desktop integration features for your setup. cd to desktop-integration (in the installation directory), and install the desktop intgration using dpkg.
Finally, start up Apache OpenOffice 4.x.x to insure it's working.
Note: Apache OpenOffice executable is called soffice and is located in /opt/OpenOffice4/program/A softlink is created on your /usr/local/bin/ directory. You can always map to the original at /opt/ if it doesnt start for whatever reason.
The Linux downloads provided on the Apache OpenOffice site (mirrors) are generic for either the RPM- or DEB-based package managers. If you have experience in directly installing these types of packages on your system, one of these types of installs should work for you. They are not specific to a particular Linux distribution.
`% sudo brew services start httpdPassword:Sorry, try again.Password:Warning: Taking root:admin ownership of some httpd paths:/usr/local/Cellar/httpd/2.4.48/bin/usr/local/Cellar/httpd/2.4.48/bin/httpd/usr/local/opt/httpd/usr/local/opt/httpd/bin/usr/local/var/homebrew/linked/httpdThis will require manual removal of these paths using `sudo rm` onbrew upgrade/reinstall/uninstall.Warning: httpd must be run as non-root to start at user login!==> Successfully started `httpd` (label: homebrew.mxcl.httpd)`
`% sudo chown -R sydcon /usr/local/Cellar/httpd/2.4.48/bin\/usr/local/Cellar/httpd/2.4.48/bin/httpd\/usr/local/opt/httpd\/usr/local/opt/httpd/bin\/usr/local/var/homebrew/linked/httpd\`
apache brew:_www 68719 0,0 0,0 4488604 1808 ?? S Lun11pm 0:00.12 /usr/local/opt/httpd/bin/httpd -k start_www 68642 0,0 0,0 4488604 1788 ?? S Lun11pm 0:00.08 /usr/local/opt/httpd/bin/httpd -k start_www 68591 0,0 0,0 4488604 1700 ?? S Lun11pm 0:00.06 /usr/local/opt/httpd/bin/httpd -k start_www 68042 0,0 0,0 4488604 1796 ?? S Lun11pm 0:00.10 /usr/local/opt/httpd/bin/httpd -k start_www 67725 0,0 0,0 4488604 1792 ?? S Lun11pm 0:00.11 /usr/local/opt/httpd/bin/httpd -k start_www 53225 0,0 0,0 4488604 1784 ?? S Dom03pm 0:00.13 /usr/local/opt/httpd/bin/httpd -k start_www 49737 0,0 0,0 4488604 1788 ?? S Dom07am 0:00.14 /usr/local/opt/httpd/bin/httpd -k start_www 42715 0,0 0,0 4488676 1768 ?? S Sab05pm 0:00.13 /usr/local/opt/httpd/bin/httpd -k start_www 37396 0,0 0,0 4488676 1792 ?? S Sab04am 0:00.15 /usr/local/opt/httpd/bin/httpd -k start_www 24048 0,0 0,0 4488676 1788 ?? S Gio11pm 0:00.14 /usr/local/opt/httpd/bin/httpd -k start
4. Navigate to the root of the Apache Kafka folder and open a Terminal. Or Open a Terminal and navigate to the root directory of Apache Kafka. For this example, we will assume that the Kafka download is expanded into the /kafka_2.13-3.0.0 directory. 2ff7e9595c
Comments